Richard Mille's BONBON Watch Collection Price - Sarasota Watch Company

Richard Mille's BONBON Watch Collection Price

Richard Mille's BONBON Watch Collection Price

 

 

Richard Mille's BONBON Watch Collection is Fun Side of Watchmaking

Drawing on affirmed ability in the zone of materials, shading, and structure, Richard Mille has taken the cover off a treats container to uncover two sorts of desserts for the wrist. Given three of the brand's notorious models, the RM 07-03, RM 16-01, and RM 37-01 offer an entry back to youth with the essential joy of marginally backward and altogether scrumptious recollections, to be delighted in without balance. The ten models show an aggregate of 60 zingingly brilliant and pop hues over the six Carbon TPT® and Quartz TPT® cases (counting the world debut of another turquoise tint), the small confections that enhance the Fruits line, and the four two-tone clay cases just as the enrichment gracing the Sweets line.

 

 

richard mille RM 07-03 MARSHMALLOW bonbon watch collection best price rate new used pre-owned sale deal - Sarasota Watch Company https://sarasotawatch.com

RM 07-03 MARSHMALLOW

BUY NOW

Richard Mille has gone to new hued earthenware for this RM 07-03 bezel and back case: a lavender-pink TZP fired related with white ATZ artistic. The casing is made of pearl set 5N red gold with fixed columns (pink sapphires, citrine, and tsavorite stones). The dial of This timepiece is a grade 5 titanium and 5N red gold, hand enameled.

RM 07-03

Movement: 29.90 x 22.00 mm

Thickness: 4.92 mm

Jewels: 25

Balance: CuBe, four arms, four set screws, angle of lift 50°

Frequency: 28,800 vph (4 Hz)

Spring: AK3

Shock protection: INCABLOC 908.22.211.100 (transparent)

 

richard mille RM 07-03 CUPCAKE bonbon watch collection best price rate new used pre-owned sale deal - Sarasota Watch Company https://sarasotawatch.com

RM 07-03 CUPCAKE

BUY NOW

Richard Mille has gone to new hued pottery for the RM 07-03 Cupcake bezel and back case: a dim blue and sky blue TZP clay. The Cupcakes case is made with micro-blasted white gold and cleaned by hand. The RM 07-03 cupcakes dial is a grade 5 titanium and white gold, hand enameled with tsavorite stones, jewels, and sapphires.

RM 07-03

Movement: 29.90 x 22.00 mm

Thickness: 4.92 mm

Jewels: 25

Balance: CuBe, four arms, four set screws, angle of lift 50°

Frequency: 28,800 vph (4 Hz)

Spring: AK3

Shock protection: INCABLOC 908.22.211.100 (transparent)

 

richard mille RM 07-03 LITCHI bonbon watch collection best price rate new used pre-owned sale deal - Sarasota Watch Company https://sarasotawatch.com

 

RM 07-03 LITCHI

BUY NOW

The front bezel of the Litchi RM 07-03 is produced using Carbon TPT® and its caseback from white Quartz TPT®, two exceptional materials with a one of a kind completion. The band utilizes a slope of Carbon TPT®/white Quartz TPT®, making precious shading progress from the bezel to the case. Its dial is made in grade 5 titanium with dark Titalyt® treatment. Every candy is painted with acrylic paint and lacquered by hand with a sweet and colorful design.

RM 07-03

Movement: 29.90 x 22.00 mm

Thickness: 4.92 mm

Jewels: 25

Balance: CuBe, four arms, four set screws, angle of lift 50°

Frequency: 28,800 vph (4 Hz)

Spring: AK3

Shock protection: INCABLOC 908.22.211.100 (transparent)

 

richard mille RM 07-03 MYRTILLE bonbon watch collection best price rate new used pre-owned sale deal - Sarasota Watch Company https://sarasotawatch.com

 

RM 07-03 MYRTILLE

BUY NOW

The Myrtille RM 07-03's front bezel is using a Carbon TPT®, and its caseback utilizes another turquoise Quartz TPT®. The band has the inclination of Carbon TPT®/turquoise Quartz TPT®, making it a rich and powerful design from bezel to caseback. The Myrtille's dial is made in a grade 5 titanium with dim Titalyt® treatment. Every piece of candy is painted with acrylic and lacquered by hand with a colorful sugary design.

 RM 07-03

Movement: 29.90 x 22.00 mm

Thickness: 4.92 mm

Jewels: 25

Balance: CuBe, four arms, four set screws, angle of lift 50°

Frequency: 28,800 vph (4 Hz)

Spring: AK3

Shock protection: INCABLOC 908.22.211.100 (transparent)

 

richard mille RM 16-01 RÉGLISSE bonbon watch collection best price rate new used pre-owned sale deal - Sarasota Watch Company https://sarasotawatch.com

 

RM 16-01 RÉGLISSE

BUY NOW

Richard Mille has gone to hued pottery for the RM 16-01 Réglisse: redden pink and yellow TZP clay. The band is made of white gold, silk completed, micro-blasted, and cleaned carefully by hand. The RM 16-01 licorice dial is grade 5 titanium and dark chrome.

RM 16-01

Movement: 30.25 x 28.45 mm

Thickness: 4.44 mm

Jewels: 32

Barrel arbor: in AP 20 steel

Balance: Glucydur®, four arms, angle of lift 53°

Frequency: 28,800 vph (4 Hz)

Spring: Elinvar by Nivarox®

Shock protection: INCABLOC 908.22.211.100 (transparent)

Escapement wheel jewels: Rubifix (transparent)

 

richard mille RM 16-01 CITRON bonbon watch collection best price rate new used pre-owned sale deal - Sarasota Watch Company https://sarasotawatch.com

 

RM 16-01 CITRON

BUY NOW

The front of the RM 16-01 Citron's bezel is using Carbon TPT®, and its caseback utilizes the yellow Quartz TPT®. The band is made at an angle with a Carbon TPT®/yellow Quartz TPT®, creating an exquisite style change from front to back. The Citron's dial is grade 5 titanium with a dim Titalyt® finish. Every piece of candy is painted with acrylic paint and lacquered by hand to create the colors pop off the exclusive timepiece.

RM 16-01

Movement: 30.25 x 28.45 mm

Thickness: 4.44 mm

Jewels: 32

Barrel arbor: in AP 20 steel

Balance: Glucydur®, four arms, angle of lift 53°

Frequency: 28,800 vph (4 Hz)

Spring: Elinvar by Nivarox®

Shock protection: INCABLOC 908.22.211.100 (transparent)

Escapement wheel jewels: Rubifix (transparent)

 

richard mille RM 16-01 FRAISE bonbon watch collection best price rate new used pre-owned sale deal - Sarasota Watch Company https://sarasotawatch.com 

RM 16-01 FRAISE

BUY NOW

The front of the RM 16-01 Fraise's bezel is produced using Carbon TPT®, and its caseback utilizes red Quartz TPT®. The band utilizes an angle of Carbon TPT®/red Quartz TPT®, making an exquisite shading change from the front to back. The dial is made in a grade 5 titanium with dark Titalyt® treatment. Every piece of candy is painted with acrylic and lacquered carefully by hand with a sugary design.

RM 16-01

Movement: 30.25 x 28.45 mm

Thickness: 4.44 mm

Jewels: 32

Barrel arbor: in AP 20 steel

Balance: Glucydur®, four arms, angle of lift 53°

Frequency: 28,800 vph (4 Hz)

Spring: Elinvar by Nivarox®

Shock protection: INCABLOC 908.22.211.100 (transparent)

Escapement wheel jewels: Rubifix (transparent)

 

RM 37-01 SUCETTE Richard Mille bonbon watch collection - Sarasota Watch Company https://sarasotawatch.com

 

RM 37-01 SUCETTE

BUY NOW

Richard Mille has gone to a tracker green TZP fired for the RM 37-01 Sucette. Its case is made with 5N red gold, glossy silk, micro-blasted, and cleaned with precision by hand. Its dial is created in 5N red gold, hand enameled and set with precious stones. The crown is also crafted with tsavorite stones.

RM 37-01

Movement: 28.00 x 22.90 mm

Thickness: 5,79 mm

Jewels: 25

Balance: CuBe, four arms, and four set screws, angle of lift 50°

Frequency: 28,800 vph (4 Hz)

Spring: AK3

Shock protection: INCABLOC 908.22.211.100 (transparent)

Escapement wheel jewels: Rubifix (transparent)

 

RM 37-01 CERISE Richard Mille bonbon watch collection - Sarasota Watch Company https://sarasotawatch.com

 

RM 37-01 CERISE

BUY NOW

The RM 37-01 Cerise's front bezel is produced using Carbon TPT®, and its caseback utilizes blood-red Quartz TPT®. This material is created with a procedure indistinguishable from that of Carbon TPT®, yet from silica strings. The band uses a slope of Carbon TPT®/dark red Quartz TPT®, making an exquisite shading change from bezel to caseback. The Cerise's dial is made in a grade 5 titanium with dim Titalyt® treatment. All candy pieces are painted with acrylic and lacquered to perfection by hand.

RM 37-01

Movement: 28.00 x 22.90 mm

Thickness: 5,79 mm

Jewels: 25

Balance: CuBe, four arms, and four set screws, angle of lift 50°

Frequency: 28,800 vph (4 Hz)

Spring: AK3

Shock protection: INCABLOC 908.22.211.100 (transparent)

Escapement wheel jewels: Rubifix (transparent)

 

RM 37-01 KIWI Richard Mille bonbon watch collection - Sarasota Watch Company https://sarasotawatch.com

 

RM 37-01 KIWI

BUY NOW

The RM 37-01 Kiwi's bezel is produced using Carbon TPT®. The caseback is made using green Quartz TPT®. The band utilizes a slope of Carbon TPT®/green Quartz TPT®, making it a productive, stunning change from bezel to caseback. The Kiwi's dial is made in a grade 5 titanium with dim Titalyt® treatment. The candy pieces are painted with acrylic and lacquered by hand, making it a timepiece you'll never forget.

RM 37-01

Movement: 28.00 x 22.90 mm

Thickness: 5,79 mm

Jewels: 25

Balance: CuBe, four arms, and four set screws, angle of lift 50°

Frequency: 28,800 vph (4 Hz)

Spring: AK3

Shock protection: INCABLOC 908.22.211.100 (transparent)

Escapement wheel jewels: Rubifix (transparent)

A Genuine Item 

In spite of its troublesome appearance, the Richard Mille Bonbon Assortment is legitimately slid from before Richard Mille manifestations. Take shading—the brand is ceaselessly growing its range. Attacks into the variety of greens, blood-red, yellow, and even pink are conceivable gratitude to the authority of materials, a significant number of the elite, that is a Richard Mille forte. The brand's comprehension of how colored earthenware production acts, skill in layering materials like Carbon TPT®, and Quartz TPT® and steady upgrades to the setting of hued gemstones are altogether fixings in these confectionary plans, which are independently inventive, energetic, unmistakable and, in particular, appealing. Finally, a finely sharpened eye for detail makes these ten models dazzling realistic synthesis that offers an abundance of shades and surfaces showing up in each segment of the watch.

 

RICHARD MILLE'S FRUITS LINE 

This colorful watch line is a respect to the very idea of sweet allurement with its delicious flavors. Notwithstanding shading angle cases made of Carbon TPT® joined with Quartz TPT® of an alternate tone for each model is an all-new turquoise shading. 

 

RICHARD MILLE'S SWEET LINE

Painted with acrylics and lacquered by hand, the 3,000 smaller than average figures coordinated in this assortment stand apart from the dials, transforming everyone into a sachet brimming with little confections. To additionally upgrade their authenticity, a 'glossing over' impact was accomplished utilizing powdered veneer and the fine sand used in hourglasses. Tart jam strips, twisty candies, sweets citrus sections, gumdrops, and different astonishments are situated on plates of evaluation five titanium that are machined and skeletonized like horological parts.

 

The Desserts assortment involves four models, all with two-tone fired cases that set off their stupendous feu polish or dark chrome-plated titanium sweets. The Cupcake, Marshmallow, Sucette, and Réglisse are brilliant and delicious, summoning an entire range of flavors. Even better, the surfaces you hope to experience after gnawing into these desserts are gathered outwardly because of an authority of enamelwork that prevails with regards to bringing out sensations like non-abrasiveness, crunchiness, and featheriness. 

 

The vibrant nature of the TZP artistic case is upgraded by the fluctuated matt and cleaned impacts of components on the dial. Dark, a primary shading in the specialized jargon of Richard Mille, is introduced in a totally different light here, as a goliath move of licorice that possesses the whole surface of a dial. Here, the most agreeable answer for acquiring the licorice state of the RM 16-01 was a stepping activity, trailed by a dark chrome covering that loans this piece its spot-on shading and surface.

CALIBRE CRMA1

Skeletonised programmed twisting in-house development with hours, minutes, free rotor geometry, oversize date, and capacity selector. 

Force hold: Around 50 hours (± 10%). 

Measurements: 52.65 mm x 34.40 mm x 13.08 mm.

 

CALIBRE CRMA2

Skeletonised programmed twisting in-house development with hours, minutes, and free rotor geometry. 

Force hold: Around 50 hours (± 10%). 

Measurements: 45.32 mm x 32.30 mm x 11.93 mm.

 

CALIBRE RM 16-01

Skeletonised programmed twisting development with hours, minutes, date, and movable rotor geometry. 

Force hold: Around 50 hours (± 10%). 

Measurements: 50.20 mm x 38.00 mm x 9.88 mm.

 

BASEPLATE AND SCAFFOLDS MADE OF EVALUATION 5 TITANIUM 

Microblasted grade five titanium with an electro plasma treatment that gives incredible unbending nature to the baseplate, just as exact surface levelness, which is fundamental for the ideal working of the apparatus train. The scaffolds are likewise in grade 5 titanium, micro-blasted, and electro plasma rewarded. 

The skeletonized baseplate and the scaffolds were exposed to separate and broad approval tests to guarantee ideal quality prerequisites.

 

VARIABLE-GEOMETRY ROTOR 

Variable-geometry rotors have been fused into these bores to make it conceivable to viably adjust rewinding of the origin to the client's movement level. The setting can be changed by altering loads that can be balanced and fixed set up by spline screws. The dormancy of the development is expanded when the loads are nearer to one another; the barrel then rewinds all the more rapidly. On the off chance that the loads are situated at the limits of the rotor, the inactivity is diminished, and the barrel twists all the more gradually. 

 

RM 07-01 and RM 37-01 rotor determinations: 

- Substantial outer outside edge and overwhelming edge ring in 5N red gold 

- Weight fragment in overwhelming metal 

- Artistic metal rollers 

- Programmed OneWay® creative twisting framework with metal rollers 

- Bidirectional winding framework 

 

RM 16-01 rotor determinations: 

- Arm in grade 5 titanium 

- High palladium content 18K white gold weight fragment 

- Weight portion with six positions balanced by tightens grade 5 titanium 

- Artistic metal rollers 

- Unidirectional; hostile to clockwise winding bearing

FREE-SPRUNG BALANCE WITH VARIABLE INERTIA

The free-sprung balance offers better dependability in case of stuns, development get together or dismantling and furthermore ensures better chronometric results after some time. The controller list is disposed of, and progressively precise and repeatable alignment is conceivable gratitude to 4 little movable loads found legitimately on the parity.

 

GEAR TEETH PROFILE

The whole going train of the RM 07-03 and RM 37-01, the essential transmitter of intensity through the development, uses a unique profile for the teeth of the wheels. Grown explicitly for Richard Mille's in-house gauges, the wheels utilize a 20° weight edge. This framework evens out any inconsistencies that may emerge between the focuses of each wheel, for example, during warm changes and frequent use, and elevates fantastic force transmission to the equalization wheel, along these lines supporting brilliant chronometric qualities.

 

MOVEMENT

• Microblasted anglage

• Microblasted-milled section

• Microblasted sinks

• Electroplasma treatment for the baseplate and bridges

 

STEEL PARTS

• Satin-finished surfaces

• Hand-polished anglage

• Hand-polished sinks

• Burnished sections

• Lapped and polished ends

• Burnished pivots

• Post faces polished

 

WHEELS

• Concave chamfering with a diamond tool

• Diamond-polished angles

• Circular-finished faces

• Rhodium plating (before cutting the teeth)

 

 

 

 

 

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!